Tuote# GTR-601_
Product Actions
Add to cart options
€ 349,00349.0 molemmat


Peak Power 1500W

Audio Specifications

2-Ohm Power Output 600Wrms x 1, <0.1% THD+N
Signal-to-Noise Ratio >80dB (ref 1W output @ 2 )
4-Ohm Power Output 380Wrms x 1, <0.1% THD+N
  • 1 vahvistin
  • 1 ohjaamoon asennettava ohjauspaneeli
  • 2 varasulaketta
  • Käyttäjän opas
GTR-sarjan monovahvistimet ja laajakaistaiset monikanavavahvistimet tarjoavat hyötysuhteen ja tehon, jota odotat D-luokan vahvistimilta — sekä suorituskyvyn, jota odotat JBL:ltä. Kaikki valikoiman mallit hyväksyvät sekä kaiutintason-että linjatason sisääntulosignaalit, mahdollistaen JBL Stadium -vahvistimien yhdistämisen periaatteessa mihin tahansa autohifijärjestelmään, mukaan lukien tehdasasennetut järjestelmät. 4- ja 5-kanavaiset vahvistimet tarjoavat Bluetooth®-suoratoiston, ainutlaatuisen Clari-Fi™ -musiikinkorjaustekniikan, joka analysoi ja parantaa pakattujen tiedostojen äänenlaatua reaaliajassa sekä bile-tilan (Party Mode), jonka ansiosta kanssamatkustajat voivat kukin vuorollaan osallistua auton suoratoistettuun musiikkiin. Tämän lisäksi varustukseen sisältyy ohjaamoon asennettava ohjauspaneeli. GTR-vahvistimet antavat sinulle mahdollisuuden muokata autosi äänentoistoa uusilla tavoilla.

Search Result For ""

Can a remote lead be installed on GTR601

Asked by: Dogman
We would like to work with you directly to help you with your issue. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Mario at Customer service
Date published: 2018-10-16

Is this amp capable of running 8ohm subwoofers? If so what would be the wattage output at 8ohms?

Asked by: Logic10
The GTR-601 is not rated to run 8 ohm subwoofer since the wattage output would be really low and would not have enough power for the Bass to produce sound to give it a 'Bassy' feeling.
Answered by: Mario at Customer service
Date published: 2018-06-14

what is the damping factor of the gtr 601 at 2ohms?

Asked by: diamondcut
Hi! Unfortunately, we do not have this specification. However, we do know that the damping factor is well over 100. We are currently working to find the exact number for this Product.
Answered by: Jemson G
Date published: 2018-02-28

Hi ! Does this gtr-601 works in 4ohm 380w rms with a magnat subwoofer 4 ohm 400w rms ?? Doesnt is it ( AMP) too low power for subwoofer , and then will gonna be distorsions over 75%-80% amp volume ? Thanks a lot !&nbsp; Have a nice DAY jbl entire team !!!

Asked by: Teodor Mihai
Hi, There would not be any problem with having the Amp power up the Sub since the Sub can handle 400W. It would depend on the source as distortion normally is an indicator for you to turn your volume down a little. There are separate level controls for the subwoofer(not all subwoofers have one) and the amp. Try minimizing the knob for the sub and check if that does the trick.
Answered by: Mario at Customer service
Date published: 2017-12-19

I am buying 2 JBL CLUB WS 1200. What would be the best amp to run these 2 subs

Asked by: KDUB
You can run the 2 JBL Club WS 1200 with the JBL GTR-601 amplifier. The GTR-601 will drive 600WRMS through all the channels and since you will be using 2 Subs it will be distributed evenly with 300W per sub. The Club WS 1200 can handle 250W with a 1000W peak power handle, so as long as you don't push the volume up to the hilt the speaker should be good.
Answered by: Mario at Customer service
Date published: 2018-01-09

Can I wire up a single Alpine SWR-10d2 to this amp at 4 ohms?

Asked by: Zmannn05
As long as the Alpine SWR-10d2 can handle 380Wrms at 4 ohms, it will work fine with the GTR-601.
Answered by: Joe G at Customer Service
Date published: 2017-12-02

When wiring a single 4 ohm dvc subwoofer @ 2 ohms, do you bridge the GTR-601 to get 600 watts RMS or just use either set of outputs?

Asked by: George O
This is a mono amplifier, so there is no possibility for bridging. The two sets of speaker terminals are simply for convenience, in case you want to connect two speakers to this single-channel amp. So, to answer your question, if you are connecting only one speaker at 2 ohms, you can connect it to one speaker terminal on the amp, and you will be good to go.
Answered by: Mark at Customer Service
Date published: 2019-03-27

Can I adjust the power output? Because it outputs 600W at 2ohms, its too much for one S3-1224, or is it better to go with gtx500?

Asked by: mihaS
The S3-1224 handles up to 500W at 2/4 ohms. The GTX-500 would be a better fit since it drives 500W at 2-ohms.
Answered by: Miko at Customer Service
Date published: 2017-12-02
  • y_2019, m_4, d_21, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_fi_FI, sid_gtr-601_, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio