JBL

Club 4505

Details
Tuote# CLUB-4505
Variations
  • Select Color
    • Black
Product Actions
Add to cart options
€ 299,00299.0 molemmat

Varastossa. Arvioitu toimitusaika 4-6 arkipäivää

Tuotetiedot

Signal-to-Noise Ratio(Full Range Channels) >85dB (ref 1W output @ 4Ω)
Power Output, 4Ω(Subwoofer Channel) 320W rms x 1, <1.0% THD+N
Power Output, 4Ω(Full Range Channels) 45Wrms x 4, <1.0% THD+N
Power Output, 2Ω(Full Range Channels) 65Wrms x 4, <1.0% THD+N
Max Power 1800W Peak
Power Output, 4Ω Bridged(Full Range Channels) 130Wrms x 2, <1.0% THD+N
Power Output, 2Ω(Subwoofer Channel) 500Wrms x 1, <1.0% THD+N
Signal-to-Noise Ratio(Subwoofer Channel) >80dB (ref 1W output @ 2Ω)
  • 1 Club-4505 -vahvistin
  • 4 johtosarjaa kaiutintason sisääntuloa varten
  • 2 lisäsulaketta
  • 2 kaksiväristä tarraa
  • 1 pikaopas aloitukseen
Uudet suorituskykyiset JBL-vahvistimet tarjoavat maailmanluokan JBL-tehon kompaktissa yksikössä, joka sopii asennettavaksi lukuisiin ajoneuvoihin, jopa silloin kun tila on rajallinen. Mono-, 4-kanava- ja 5-kanava-versioina saatavat Club-vahvistimet sisältävät säädettävät elektroniset jakosuotimet ja basson korostussäädöt järjestelmän tarkkaan säätämiseen. Niissä on sekä kaiutintason- että linjatason tulolitännät, jonka ansiosta vahvistimet sopivan käytettäväksi useimpien autostereoiden kanssa. Ne ovat myös yhteensopivia useiden uusien teknologioiden kanssa kuten erilaisten, kuljettajaa avustavien järjestelmien kanssa. Lisäksi niissä on tuki Harman HALOsonic-järjestelmälle, joka pystyy simuloimaan useita erilaisia moottoriääniä parantaen hybridien ja sähköautojen ajokokemusta, vaimentamaan tien melua ja tekemään musiikista paremman kuuloista, sekä paljon muuta.

Search Result For ""

Any bass remote compatible with this amplifier?

Asked by: Ma25
We would like to work with you directly to help you with your issue. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Mario at Customer service
Date published: 2019-01-15

I have a head unti that outputs a low level balanced-differntial signal. Do these except balanced-differential?

Asked by: Gc2580
Thank you for your question. We would like to work with you directly to help you with your issue. Please submit a case request at https://www.harmanaudio.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: remy b
Date published: 2018-12-13

I have the Club 4505 amp, A set of Club 5000C, set of Club 6500C and 2 WS1200 woofers. My question is how would be best to hook up the 2 woofers to the woofer output on the amp? Which Ohm settings would I use on the amp and the woofer?

Asked by: Rick C
We would like to work with you directly to help with your inquiry. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Karl Vincent
Date published: 2018-11-30

wich is the diference between the REFERENCE 4555A INFINITY HARMAN AMPLIFIER 5 CHANNEL AND THE CLUB 4505 JBL HARMAN THEY COST THE SAME 299.95 SOMEONE WHO COULD HELP ME

Asked by: raicerda
Hi! Both amplifiers are the same in terms of audio specifications. The main difference between the two would be the materials that were used on the amps.
Answered by: Nick F
Date published: 2018-06-28

i have purchased this amp along side the s3 1124 subwoofer now since the sub can handle 500rms at either 2 or 4 ohms i dont understand what to switch it to as the power output of the amps says 320 rms at 4 ohms and 500rms at 2 ohms how do i wire it for 2

Asked by: Ryanry
Hi, and thank you for supporting JBL! The power handling of the woofer is independent of the impedance, so the 500 W is true no matter if you switch it to 2 Ohms or 4 Ohms. When the amplifier can handle a 2-ohm load, you may as well take advantage of the extra power it can produce into the lower impedance, and use the 2-ohm setting on the woofer. Please note that the lower impedance is a tougher load on the amplifier, so if you push your system to the limit, you may have the amplifier overheat or disconnect due to activating the protection curcuits because it is being driven too hard. If this happens, I would suggest to switch the woofer to the easier load of 4 Ohms. There is a switch on the woofer that you use to select 2 or 4 Ohms.
Answered by: Bo Harman
Date published: 2018-06-04

is this amplifier a D class?

Asked by: carlosedgoav
Yes, the Club 4505 is a class D amplifier.
Answered by: Steven M
Date published: 2018-04-18

Is the Subwoofer channel on this amp mono?

Asked by: Juggernaut78
The subwoofer channel on the JBL Club 4505 amp was designed as a mono output that can handle up to 320 W rms at 4 ohms or 500 W rms at 2 ohms.
Answered by: Steven M
Date published: 2018-03-29

Im planning on getting a Stage 1220B sub and 4 GTO 629 speakers for this amp would i need to upgrade my alternator?

Asked by: Dermy
We would like to work with you directly to help with your inquiry. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Steve S
Date published: 2018-03-22
  • y_2019, m_1, d_18, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_fi_FI, sid_club4505-, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio
Jakaminen